Long Stem Premade Fans Wholesale (8-16mm)

What A Long Stem Base Does On The Lash Line

A long stem gives the fan a broader bonded section, so more of its base meets the natural lash. Practically, that changes how the artist works rather than how the set looks on a photo: a wider footprint tolerates a heavier adhesive dot, placement is more forgiving, and the finished set carries a visible, structured root instead of a hidden one.

Which D Counts And Tray Formats Pair With A Long Stem

A long stem is the density base. The extra contact area is what keeps a high petal count stable on the lash, so the pairing rule runs in one direction: the higher the count, the more the long stem earns its footprint.

Who A Long Stem Suits

Dense volume work, artists who load a heavier adhesive dot and want the base to hold it, and clients who like a set that visibly sits on the lash line. It is also the base for artists moving from 5D–7D into 10D–12D, because the wider footprint absorbs the extra petals without changing technique. Where the client is hard on the lashes rather than fussy about the root, the waistband tape base adds holding power on top of the same density. It fits poorly on fine or sparse naturals, where the base becomes the most visible part of the set, and on clients who want a natural-look finish.

What To Check Before A Bulk Order

Check that the stem does not curl or bend on pickup — a long base has more material to distort, and a bent stem is visible on the finished set. Then check that the fan still opens cleanly at the tip: a broader base should not stiffen the fan above it. Place three fans on a strip and look at the base from the side; if the bond sits proud of the lash instead of flat, the adhesive dot is too large for the base and the artist will fight it for the whole set.

Repeat on trays from two different boxes, and place one fan in the most humid conditions your studio sees — retention at a wide base is where humidity shows first. A sample tray covers both checks before a bulk commitment.

Storage matters for this base more than for the others. A compact stem is short enough that a tray packed flat in a drawer keeps its shape; if trays are stored upright under weight, the fans closest to the lid can bend at the base before they are ever used. Check the last row of a tray that has travelled, not just the first.

Full Specification

Order, Samples And Private Label

Wholesale starts at 50 trays, in single or mixed pack, with length set per row on mixed. Densities between 2D and 14D are produced to your specification rather than limited to the standard ladder. For tray labels, box printing and branded packaging see private label; to compare base styles at the same density, the full premade fan range is the index; to start an order, send the spec through the wholesale inquiry form.

Full Specification

Specification	Available options
Length	8 mm – 16 mm
Curl	J, B, C, CC, D, DD
Thickness	0.05 mm / 0.06 mm / 0.07 mm / 0.085 mm / 0.10 mm
Density	2D – 14D
Rows per tray	Customer-defined
Material	BSF.T fibre
Colour	Black, brown, blue, pink, purple, red, green
Packaging	Acrylic box (default) or paper box (optional). Single pack (same length in each row). Mixed pack (length set separately for each row).
MOQ	50 trays
Custom	Customisable

Product notes

**Reference chart: curl, thickness, length**Visual reference for curl shape, thickness steps and length. The specification that applies to your order is the one in the table above.

**Curl shape reference**Illustration of how curl changes the lift along the lash. Our standard curls are J, B, C, CC, D and DD.

**Stable curl, thin and lightweight**Well-formed curl that holds its shape, made from BSF.T fibre for a soft, comfortable wear.

**Thin and soft, neat and uniform**Ultra-thin fibres in a heat-bonded base that keeps the fan neat and easy to pick up.

**Easy to pick up from the strip**The base holds together on pickup so the fan keeps its shape on the natural lash.

**Tray view — 4D mixed pack**Factory tray as shipped, from the tray run we would produce for this specification. Compare it with the tray in your sample kit.

Product display

Wholesale trays by density

In-stock densities: 4D, 5D, 7D, 8D, 9D, 10D and 12D, supplied with product photography. Densities 2D, 3D, 6D, 11D, 13D and 14D are made to order against your specification. Every density ships as Single pack (same length on each row) or Mixed pack (length set by row). MOQ 50 trays.