Premade Fans Wholesale (2D-14D) — 7 Buying Checks

Ready-to-use premade volume fans. Available in multiple colors and strand counts. OEM private label supported.

Shop by D Count

Fan density runs from 2D to 14D. Higher D-count means more strands per fan and a denser result on the eye; lower D-count keeps the set lighter and faster to place.

2D fans3D fans4D fans5D fans6D fans7D fans8D fans9D fans10D fans12D fans14D fans

Shop by Base Style

The base is what the artist handles. Tapered point and short stem give a narrower attachment for a lighter pickup; waistband tape and long stem give a wider, flatter footprint that some artists find faster to place. Base choice affects pickup feel more than appearance.

Tapered pointShort stemWaistband tapeLong stem

Full Specification

Specification	Available options
Length	Short stem 7 mm – 16 mm · Long stem 8 mm – 16 mm
Curl	J, B, C, CC, D, DD
Thickness	0.05 mm / 0.06 mm / 0.07 mm / 0.085 mm / 0.10 mm
Density	2D – 14D
Rows per tray	Customer-defined
Material	BSF.T fibre
Colour	Black, brown, blue, pink, purple, red, green
Packaging	Acrylic box (default) or paper box (optional). Single pack (same length in each row). Mixed pack (length set separately for each row).
MOQ	50 trays
Custom	Customisable

Premade Fans Wholesale: 7 Buying Checks

Most premade fan sourcing problems appear on the third or fourth order, not the first. These are the checks that make a reorder match the sample you approved.

01Fan base integrityInspect the attachment point. A base that has fused or splayed will not place cleanly, and the defect usually appears in the lower rows first.
02Fan spread across the trayCheck symmetry at the last row, not only the first. A tray that narrows toward the end shows as an uneven set.
03Curl consistencyCurl should hold from sample approval through to repeat production. Compare the old tray with the new one side by side.
04Thickness against densityMatch the fibre diameter to the fan dimension. A thin fibre at a high D-count reads sparse; a thick fibre at a low D-count reads heavy.
05Strip pickupFans should release individually without collapsing or leaving residue. This is the property artists notice first.
06Tray to packaging fitThe box internal dimensions must match the tray footprint. Confirm this before approving private label packaging.
07Written specificationCurl, diameter, length mix, stem type, tray format and packaging version belong in a record, so a reorder references a document rather than a memory.

Frequently Asked Questions

What are premade fans?

Premade fans are volume fans bonded into a fan shape before application. The artist picks up a finished fan instead of building one, which shortens the fanning stage and keeps fan shape identical across a set.

Which D-count should I start with?

Most salons start at 6D to 8D for everyday volume work and move to 10D or 12D for fuller sets. The right starting point depends on the density your clients already ask for, not on the highest number available.

Single pack or mixed pack?

A single pack carries the same length on every row, which suits a fixed service menu. A mixed pack sets length by row, which suits artists who map a set rather than repeat one.

What is the difference between the four stem types?

Tapered point and short stem give a narrower attachment for a lighter pickup. Waistband tape and long stem give a wider, flatter footprint that some artists place faster. The stem is what the artist handles, so it decides the service feel.

What should I check in a sample tray?

Fan base integrity, fan spread across the whole tray, curl consistency at the last row, and whether fans release without collapsing. Check the bottom rows, not only the top.

Is MOQ 50 trays fixed?

It is a planning figure for a starter run rather than a fixed rule for every construction. Confirm the current minimum for the specific specification you want.

Can premade fans be private labelled?

Yes. Tray labels and printed boxes carry your brand, and the packaging is approved alongside the product specification so the box fits the tray.

Product notes

**Reference chart: curl, thickness, length**Visual reference for curl shape, thickness steps and length. The specification that applies to your order is the one in the table above.

**Curl shape reference**Illustration of how curl changes the lift along the lash. Our standard curls are J, B, C, CC, D and DD.

**10D factory photo 1**Original factory photo from the 10D short stem single pack folder — premade-fans.

**10D factory photo 2**Original factory photo from the 10D short stem single pack folder — premade-fans.

**10D factory photo 3**Original factory photo from the 10D short stem single pack folder — premade-fans.

**10D factory photo 4**Original factory photo from the 10D short stem single pack folder — premade-fans.

Product display

Wholesale trays by density

In-stock densities: 4D, 5D, 7D, 8D, 9D, 10D and 12D, supplied with product photography. Densities 2D, 3D, 6D, 11D, 13D and 14D are made to order against your specification. Every density ships as Single pack (same length on each row) or Mixed pack (length set by row). MOQ 50 trays.